Table of Content
Its best to shorten them to a natural oval shape instead of an almond or square shape in order to protect them from being caught, broken, and overloaded, says Bryzek. But prolonged exposure to acetone can be very damaging to your natural nails. You see acetone is a very strong chemical and will severely dehydrate both your nails and skin.
Take some acetone and clean your nails with a cotton pad. I often also run them unter the water with some soap and a brush. Then I take the acetone again and do a last whipe over the nails to remove any oils. If your nails look rough, apply cuticle oil to the surface of your nail and buff them using a nail buffer. Paint over the tip, like you did with your color gel. Once again, cure the gel polish under a UV light for 2-3 minutes.
Rubbing alcohol
If you are using a reputable lamp, it will inherently bounce the light evenly over all of the nails, so this is another reason why I recommend the Gelish Lamp. Before we get started with the exact steps that you need to follow, let’s first go over what you will need. If you are a beginner and are looking to do gel nails from the comfort of your own home, then you will want to know the correct way to do it. I hope you enjoyed this tutorial on how to an infill for your gel nails and it was helpful. Don’t forget to see what’s going on on my other social media.
Gel nail polish application requires many tools you probably already have in your at-home nail polish kit, but with a couple of important additions. Using the PH Bond from the kit, apply to your nails and let it sit for at least 30 seconds. If you are using rubbing alcohol (it’s literally the same thing), use a lint-free cloth like a paper towel, soak it in alcohol and rub it across your nails. The purpose of rubbing alcohol is to dehydrate your nails. Typically, most gel removal steamers will beep you, indicating it’s done. When you’re told it’s complete, use an orange wood stick or a nail scrapper to scrape off the gel polish.
Can You Remove Dip Powder Without Acetone
This product is applied after the nail polish, forming a protective layer on it and achieving a more resistant and long-lasting manicure. The biggest disadvantage to gel manicures is improper removal, Gibson Tuttle shares. You can avoid this by properly removing the polish yourself at home or seeking manicurists who take their time in removal to protect your nails. As annoying as that might be, you should never pick off the rest. “Gel manicures dont damage nails what can be damaging is a poor removal process such as peeling it off the nail,” Totty says. Unlike regular nail polish, gels and acrylics dont come off with a simple swipe of remover .
Use a coarse nail filer to file down the top coat layer until it is not shiny and smooth anymore. Filing is important because it helps the gel remover product penetrate through the polish and bond with it. Some gel methods leave a tacky, sticky layer on and around your nails after curing the top gel. If this is the case, simply take a cotton ball dipped in isopropyl alcohol and wipe over the tacky.
Apply base coat
Performing DIY gel nails at home is a matter of preparation. Make sure you have the necessary tools before you begin. The better the tools you have, the better the results. But at the end of the day, the gel polish you choose is what counts the most. With our help, we’ll help you remove your gel nail polish at home as well as the manicurists do at professional salons. Remember, when you have a gel manicure, hot water isn't your best friend as it lifts gel polish faster.
Applying gel nails gives you the strength of acrylic nails with the appearance of natural nails. When applying gel nails, you don’t get the strong fumes that you get when acrylics are applied. Each layer has to harden under this light for two to three minutes.
Take the time to cut, file, and shape your nails. Finally, finish shaping by rounding the surface of your nails with a buffer. Clean your nails thoroughly with rubbing alcohol or cleanser to allow the polish to adhere directly to your natural nail. Any impurities, such as remaining cuticle oil or dust particles, can cause the polish to lift prematurely. If you want to try gel nails but don't know where to start, this guide will give you a step-by-step tutorial on how to apply gel polish. Nail buffing is a necessary step in your home manicure.
Your best bet would be to use baby wipes or just wash your hands extra thoroughly. Cure your nails one last time, for at least a minute, so you can ensure that they are perfectly dried and sealed. Cure your polish in between each coat, placing your nails under the lamp for at least 30 seconds each.
This will create a nice even look to your nails and will help them stick together. When you put the second coat of polish on, it will help the polish stick better to your nails because it is more even. As with any mani, chips and broken nails are still a possibility with gels theyre just not as likely. If you do chip or break a gel, it helps to have a nail file on hand at all times.
If your nails are already even, this step can be skipped. Make sure to buff your nails to make it a rough before you apply the polish for the best result. Cuticle oil helps to bring such nails back to shape, making them beautiful and smooth hence easier to paint on.
Olive oil and other kitchen oils can also be used. And if you don’t have any of these items on hand, you can always try vinegar or warm, soapy water. Next, use the stainless steel or wooden cuticle pusher to gently scrape the polish from the nail, working on one finger at a time. Once you’ve buffed the shiny top coat off every nail, it’s time for an acetone nail polish remover soak. At this stage, you may be tempted to try to speed things up by soaking both hands at once, but Colley advises against it.
No comments:
Post a Comment